Data Sheet
Dimming Module



We're all familiar with the phrase “Let There Be Light.” But some of us prefer to be a little more specific. “Let there be light above the wet-bar, a little less over the piano, and some brilliant illumination to display the collection of modern art.”

Which is where our dimming module comes in rather handy.

It's a powerful and flexible module that controls from one to eight loads - up to nineteen hundred and twenty watts of power. Although used primarily for lighting, it can also be used to control other electrical devices such as AC motors - think fountains and curtains.

With safety features such as voltage spike protectors and replaceable fuses, this is as smart a dimmer as you've ever seen. It even comes with a paintable aluminum face plate, so that it can blend perfectly with its surroundings.

Funny that it should be called a dimming module, when it's full of so many bright ideas.

   
Unique design controls motors as well as lighting devices
Eight outputs, each capable of supplying 240 watts
Outputs can be “ganged” together in various combinations to supply more power, up to 1,920 watts total
Custom mounting bracket allows module to adapt to wall requirements
Installation in any room
Stylish finished cover, yet paintable to match any room
   
Technical Specifications
General Standards/Approvals ETL / UL508 Listed
CAN/CSA Std. C22.2 No. 14-05
FCC Part 15: Class B
CAN 2.0B Compliant
Electrical AC Input (service feed) 120VAC, 16A max (single 20A circuit)
  AC Output 8 channels, 2A max (240 watts) per channel. Gang Outputs for loads of 240; 480; 720; 960; 1,200; 1,440; 1,680; and 1,920 watts in any combination up to a maximum of 1,920 watts.
  DC Output 42VDC max, 1A max
  Supported Loads 1920 W incandescent lamps, variable or switched; 1920 VA magnetic low-voltage, variable or switched; 1920 VA electronic low-voltage, variable (forward phase dimmable only) or switched; 480 VA dimmable CFLs, variable or switched; 480 VA non-dimmable CFLs, switched only; 1920 VA non-dimmable fluorescents, switched only; 1920 VA neon/cold cathode, switched only; 1/8 HP motors, variable or switched
  Cooling Convection cooled, no fans required
Physical Color Silver bezel and face plate, paintable
  Connectors 2 - Spring Cage Terminals - AC Hot and Neutral input: 12-24 AWG
8 - Spring Cage Terminals - Controlled AC Hot output: 12-24 AWG
RJ-45 CAN-Bus
  Output Configuration 7 Slide Switches - AC ganging selectors
  Buttons Paperclip - Commissioning and Reset
  Indicators Status - Multi-mode status indicator
  H x W x D DM1-8R 11.3" x 5.6" x 3.9"
DM1-8T 12.9" x 6.4" x 1.5"
  Weight DM1-8R 4.8 lbs
DM1-8T 2.3 lbs
Environment Operating Temperature 0 deg. C to 40 deg. C (32 deg. F to 104 deg. F)
Accessories Included Paintable silver bezel
Jumper Block for pre-finish lighting
 
© Copyright 2008 Colorado vNet, LLC. All Rights Reserved.
Contact Us  |  Privacy Policy  |  Trademarks